Hägglunds CMp - Personnel Qualification

RE 15409, Version 08.2022, Bosch Rexroth AB
Safety instructions | CMp 7/64
Bosch Rexroth AB declines any responsibility for damage resulting from improper
use. The user of the equipment is fully responsible for any risk arising from
improper use of the product.
Improper use of the product includes:
• Using outside the operating parameters approved in the product-specic data
sheet or in the order conrmation (unless customer-specic approval has been
granted)
• Modication of factory settings by non-authorized persons
• Use of add-on parts (e.g. cables and other components) that are not specied by
Bosch Rexroth has to be approved by contact at Bosch Rexroth.
• Extension or conversion is not permissible and has to be approved by contact at
Bosch Rexroth.
• Using the S-Link Monitoring Unit in explosive environments unless the
component and machine/system has been certied as compliant with the ATEX
directive 2014/34/EU.
• Using the S-Link Monitoring Unit in an aggressive atmosphere without necessary
additional measures.
2.4 Personnelqualication
The work steps described in the present documentation require basic skills
in mechanics/electrics as well as knowledge of the corresponding technical
terms. In order to ensure safety at work, these jobs must be exclusively carried
out by qualied technical personnel or by trained staff under the direction and
supervision of qualied personnel.
Qualied personnel are in a position to recognize possible hazards and institute
appropriate safety measures thanks to their professional training, knowledge and
experience, as well as their understanding of the relevant conditions pertaining to
the work to be done. Qualied personnel must observe the subject-specic rules.
Bosch Rexroth offers training support for special elds. For more information
about training, please contact your Bosch Rexroth representative.