Hägglunds CMp - Technical Specification; Product Identification

RE 15409, Version 08.2022, Bosch Rexroth AB
Function | CMp 17/64
5.3 Technicalspecication
A Technical Specication is required for the specication of the S-Link system
conguration. Contact Mll Technical helpdesk for TS documentation. The
completed TS shall be sent to Mll Technical helpdesk for hardware conguration.
The TS needs detailed information about the existing hydraulic system so a
detailed knowledge about the system is needed.
5.4 ProductIdentication
The product identication for the box (SLMU) is marked on a sticker inside the
box. The identication for the complete system (SLHP) is marked on a sticker
outside on the box or on all boxes in bigger systems.
Fig. 4: Example of product identication