RE 15409, Version 08.2022, Bosch Rexroth AB
Ordering code | CMp 13/64
4.4 S-link Sensor Package (SLSP)
The order code for the S-link sensor Package handles:
– Sensors
– Couplings between sensors and the system components
– Cables for connection of sensors to the box
Each SLSP order code will describe a sensor, an adapter or the total added cable
length for the system.
Example:
SLSP 01 00 000 0
01 02 03 04 05
01 Type of package
S-Link Sensor Package SLSP
02 Type of sensor
No sensors included 00
Case pressure sensor 10 bar 01
Charge pressure sensor 250 bar 02
High pressure sensor 400 bar 03
Temperature sensor 30 mm 11
Temperature sensor 60 mm 12
Temperature sensor 30 mm ¾" 13
Tank temperature sensor Connection 1/2“ G, length 510 mm 14
Ambient temperature sensor 15
Drain ow sensor 50 l/min 21
Drain ow sensor 100 l/min 22
Drain ow sensor 200 l/min 23
Water content sensor (0 to 100%) 31
03 Adapter coupling
No adapter couplings included 00
Tube 1 ¼", 2x ¼" 50
Tube 1 ¼", 1x ¼", 1x ½" 51
Tube 1 ½", 2x ¼" 52
Tube 1 ½", 1x ¼", 1x ½" 53
Tube 1 ½", 1x ¼", 1x ⅜" 54
Flange SAE 6000 1", 1x ¼" 60
Flange SAE 6000 1 ¼", 1x ¼" 61
Flange SAE 6000 1 ½", 1x ¼" 62
Flange SAE 6000 2", 1x ¼" 63
04 Cable length
No cable set included 000
25 m 025
50 m 050
100 m 100
250 m 250
500 m 500
05 ATEX
No 0
To Next Page
Loading...