17
Operation
2.3 Starting the vehicle
Pay attention to the following
information before starting the
vehicle:
• For safety reasons, the driver's seat
is equipped with a seat contact
switch. The vehicle can only be start-
ed when the operator is sitting on the
driver's seat. The function of the seat
contact switch must not be by-
passed.
• The seat contact switch is monitored
electronically. Any attempt at manip-
ulation can lead to the vehicle being
automatically locked against use.
• The vehicle may only be used in am-
bient temperatures of 0°C to 40°C.
Full loads should only be applied to
the units on reaching operating tem-
perature.
To Next Page
Loading...
