30
Operation
Button for suction turbine
(Fig. 10/13)
It serves to switch the suction turbine on
and off. When the suction turbine is
switched on, the control lamp in the but-
ton lights up. If the control lamp flashes,
the suction turbine is in the switching on
or off phase.
Switch the suction turbine off in
the case of wet waste.
Button for rotary brush (Fig. 10/14)
It serves to switch the rotary brush on
and off. When the rotary brush is
switched on, the control lamp in the but-
ton lights up.
Button for sweeping functions
(Fig. 10/15)
It serves to switch the sweeping opera-
tions on and off. The rotary brush, side
brush and suction turbine are switched
on and off.
To Next Page
Loading...
