Hamilton HTK User Manual

Validator
• Select
• Select
• Select
The screen should look like this:
NOTE: Changing the validator type requires a system reboot before new setting is active
Validator Type: Using the pull down, you’ll want to select the validator type you are using. Usually this is
done in the factory, so will you only need to change this if you change Validator types or if you have to
program the machine from factory defaults.
Your choices are:
Document #101-0243
101
02/01/18

Hamilton HTK Specifications

General

Brand	Hamilton
Model	HTK
Category	Digital Signage
Language	English