POS
• Select
• Select
• Select
• Select
The screen should look like this:
POS is a point of sale that generates a code on and off site that can be redeemed at the HTK.
POS Type: Using the pull down, you can choose which POS System you are using
HCS 5 Digit - Hamilton code system, generating a 5-digit code
HCS 6 digit – Hamilton code system, generating a 6-digit code
HCS Tunnel Pass – Hamilton Tunnel Pass system
POS 4000 – Unitec POS 4000
Unit Number: When multiple HTK’s are being used, the POS system will identify them by their unit
numbers. You will increase the unit number by one per HTK.
Once you have completed these settings, click activate changes to save the settings. Then click the back
button to the previous page. Continue to click Back until you are at the page you need.
To Next Page
Loading...
