Custom Single Relay
*NOTE: Custom single relay vend requires a second wash interface pan and harness, if more than eight
relays are required.
**NOTE: There is a dip switch bank on the backside of the wash interface pan. The wash interface pan
#1, switches (1) (2) and (3) should all be set to the ON position. The wash interface pan#2 switch (1)
should be ON.
Custom-single relay Vend: This is designed so the HTK can fire one relay from either of the wash
interfaces, expanding the relays available to sixteen.
Click the Vend Pattern tab
To assign a package or buy up to a specific wash interface pan and relay, use the drop down box to the
right of the Item or Buy up name.
To Next Page
Loading...
Need help?
General
