Hamilton HTK User Manual

DAN/AUX
• Select
• Select
• Select
• Select
The screen should look like this:
HTK Listen Port: The port the HTK is listening for connection on. This should be set to 8050 unless
instructed by Hamilton to change.
Listen SSL: should be off unless instructed by Hamilton
Retry Interval: The time, in minutes, the HTK waits before trying to send a record again. Common
setting is 10 minutes.
Click save
Click on the Listeners tab
Document #101-0243
75
02/01/18

Hamilton HTK Specifications

General

Brand	Hamilton
Model	HTK
Category	Digital Signage
Language	English