Microlab
®
STAR User Manual
Page 154 of 225 610766/02
Here’s what the method finally looks like:
$PHWKRGXVLQJQHHGOHV.
Load the “Plate” and “Samples” sequences. The “Samples” sequence is reducible (check the
checkbox) to allow a runtime reduction of samples.
Drag the SMART Step “Needle Wash Settings” to the next line, accept the default settings
and click OK. Select the sequence ML_STAR.WashStations.
Drag a loop from the general commands.
Loop over the Samples sequence.
To Next Page
