Handiquilter ProStitcher Lite - Optional U.S. Grounding

Pro-Stcher Lite for the HQ Simply Sixteen Installaon Instrucons | 9
Oponal U.S. Grounding
This product is for use on a nominal 120 V or nominal 220 V circuit and has a grounding plug that looks
like the plug illustrated in sketch A above. A temporary adapter, which looks like the adapter illustrated in
sketches B and C, may be used to connect this plug to a 2‑pole receptacle as shown in sketch B if a properly
grounded outlet is not available.
The temporary adapter should be used only unl a properly grounded outlet can be installed by a qualied
electrician. The green colored rigid ear, lug, and the like, extending from the adapter, must be connected to
a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must
be held in place by the metal screw.
 IMPORTANT: In Canada, the use of a temporary adapter is not permied by the Canadian Electric
Code.
GROUNDED OUTLET
BOXES
METAL
SCREW
ADAPTER
B
C
TAB FOR
GROUNDING SCREW
A
GROUNDING
PIN