Handiquilter ProStitcher Lite - Page 27

26 | Pro‑Stcher Lite for the HQ Simply Sixteen www.ProStcher.com
2. Starng at one end of the table, begin mounng
the blue Flexirack to the front of the table
while aligning it to the front black gear on the
Pro‑Stcher Lite assembly carriage. Ensure the
blue Flexirack is close nough to the table top
edge to be secured by the clamps and screws
into the predrilled and tapped inserts in the
mount.
 NOTE: Once you align the blue rack with
the center of the black gear you may nd it
helpful to measure the distance between the
blue rack and the track support. With this
dimension you can cut a spacer to aid you
in keeping the blue rack straight the enre
length of the table
3. Peel back a few inches of the pink protecve
layer of the tape. Posion the blue Flexirack by
aligning it to the black gear as you move down
the table. Press down on the blue Flexirack to
sck it rmly to the table.
black gear
blue
Flexirack
cut‑away view
coarse track
adjustment
from below
cut‑away view
ne
adjustment
from above