EasyManua.ls Logo

Handiquilter ProStitcher Lite - Read All Instructions Before Using

Handiquilter ProStitcher Lite
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pro-Stcher Lite for the HQ Simply Sixteen Installaon Instrucons | 5
Read these instrucons before using the machine
To use the system safely
1. Keep hands and loose clothing away from wheels, gears or other moving parts.
2. Turn the system o and unplug the cord in the following cases:
Turn the system o and unplug the cord in the following cases:
when you have stopped using the machine
when you replace or remove the quilng machine needle or any other part
in case of failure when you use the system
when you check or clean the machine
when you leave the system unaended
3. Connect the machine directly to the wall outlet. Do not use extension cords.
To increase the life of your system
4. Do not store this system in areas exposed to direct sunlight or high humidity. Never use or store the
system near a heater, an iron, a halogen lamp or other hot things.
5. Clean the tablet screen with a so, lint‑free rag. If necessary, dampen the rag with a small amount of
isopropyl alcohol. Do not use any other cleaners on the tablet screen.
6. Use only neutral soaps or detergents to clean the carriage. Benzene, solvents and scouring powders can
damage the machine and therefore should never be used.
7. Do not drop or bump the system.
8. Always consult the manual to replace or x any other part of the system.
To repair or adjust the system
If the system breaks down or needs adjustment, rst check the troubleshoong chart in the
appendix to inspect and adjust the system yourself.
If unable to x, contact your local retailer.