Applicable truck models:CPCD25/30/35-XW33C-RT4,CPCD25/30/35-XW43C-RT4,
CPCD25/30/35-XG72E-RT2,CPCD25/30/35-XG72C-RT4,CPCD25/30/35-X2W33E-RT2,
CPCD25/30/35-X2G72E-RT2,CPCD15/18-XW33C-RT4,CPCD15/18-XW33E-RT2
Water temperature gauge
When the ignition key switch is in the ┃ (open)
position, the water temperature gauge is active,
displaying the engine coolant temperature; in
normal operation the LCD will show that it is
within the range 60℃-110℃.
Caution
Stop operation immediately and reduce
engine speed to cool down the engine
and then stop the engine when the
liquid-crystal display is in the red area.
Check the coolant level is sufficient and
whether the fan belt is tight.
Fuel gauge
When the ignition key switch is in the ┃ (open)
position, the fuel gauge will display the
approximate fuel quantity in the fuel tank.
It is recommended to fill up the fuel tank
everyday after work .
Stopwatch
When the ignition key switch is in the ┃ (open)
position, the stopwatch will start running. The
stopwatch reading will increase by one for
every hour of operation.
The stopwatch displays the cumulative working
hours of the forklift truck.
Caution
After the cumulative hours reaches the
first 100h and a certain period, the
“wrench” icon will flash for 1 hour, this
indicates that the forklift truck needs to
be serviced. See monthly maintenance
after the first flash. See the detailed
information about the maintenance
cycle schedule for each cycle. The
specific flash time depends on the
actual situation.
To Next Page
Loading...
