HANGCHA CPCD15 - Regular Replacement of Key Safety Parts; Forklift Oil List

83
Nominal
Diameter
mm
Strength Grade
4.6
5.6
6.8
8.8
6
4-5
5-7
7-9
9-12
8
10-12
12-15
17-23
22-30
10
20-25
25-32
33-45
45-59
12
36-45
45-55
58-78
78-104
14
55-70
70-90
93-124
124-165
16
90-110
110-140
145-193
193-257
18
120-150
150-190
199-264
264-354
20
170-210
210-270
282-376
376-502
22
230-290
290-350
384-512
512-683
24
300-377
370-450
488-650
651-868
27
450-530
550-700
714-952
952-1269
30
540-680
680-850
969-1293
1293-1723
33
670-880
825-1100
1319-1759
1759-2345
36
900-1100
1120-1400
1694-2259
2259-3012
39
928-1237
1160-1546
1559-2079
2923-3898
Note:
a. All key joints use the bolts in 8.8 Grade.
b. The bolt grade can be found in the head, if not it is 8.8 Grade
3. Regular replacement of key safety parts
a. It is difficult to identify damage to certain parts through regular maintenance, thus in order to
ensure the safety of the forklift, the user should regularly replace the parts listed in the table
below.
b. If the replacement time has not been reached but there is any abnormality found in the following
parts, they should be replaced immediately.
Key Safety Part
Service Life (Years)
Brake hose or rigid pipe
l-2
Hydraulic rubber hose for the lifting system
l-2
Lifting chain
2-4
High-pressure rubber hose and flexible tube for the
hydraulic system
2
Brake fluid reservoir
2-4
Fuel hose
2
Sealing parts and rubber parts in the hydraulic
system
2
4. Forklift Oil List
1.5t-3.5t-3.5t Forklift Oil List