5. Lubricating System Diagram
Note:
a. Please add the specific lubrication oil for the specific forklift model based on the Forklift Oil
List.
b. Refer to the Weekly Maintenance (40h) for the lubrication of the mast and chain.
Environmental protection:
a. Clean, maintain and repair the vehicle at the designated place.
b. Before dismantling the pipeline, joints or related parts, special containers should be used to
receive used fluids (including coolant, engine oil, hydraulic oil, transmission oil, ATF, brake fluid,
grease, etc.) and used batteries.
c. The used oil/fluid should be recycled according to the local environmental protection laws and
regulations to prevent pollution of the environment, it should not be poured away or disposed of
at will.
Safety awareness:
The temperature of the coolant, engine oil, hydraulic oil, transmission oil and ATF after operation for a
long time becomes very high, the oil change should not be carried out until the temperature drops
below 70℃; skin should be protected from the oil, otherwise it will burn or damage the skin.
To Next Page
Loading...
