HANYOUNG NUX TD510 Series - Page 29

27
Installation
Before starting
Operation
Screen block
diagram
Function setting Program System setting Specifications
▶ Concurrent control
2) Program operation 2 screen
- Press Run button in the center left of stop screen of program operation screen 2 in order to switch to the program operation 2 operation screen.
No. Description
1 Displays state of SD card.
2 Runs hidden menu pane. Click the same to hide menu pane.
3 Go to operation 3 screen.
4 Go to main menu screen.
5 Switch channel (Ch.1 ↔ Ch.2).
6 Displays measurement(PV) of channel.
7 Displays unit of channel.
8 Displays heating control output(H.MV) of channel. (For heating/cooling control)
9 Displays cooling control output(C.MV) of channel. (For heating/cooling control)
10 Displays target setting value(TSV) for channel.
11 Displays current setting value(NSV) for channel.
12 Displays ascending/descending/holding state of channel.
13 Displays tag name of channel (which may be changed with operation setting).
14 Run/stop button.
②
⑩
⑦
③ ④
⑫
⑯
⑱⑰ ㉓⑲ ⑳㉒
⑬
①
⑥
⑤
⑪㉑
⑧
⑭
⑨
⑮
Fig. 33) Stop screen of program operation 2(Ch.1)
Fig. 35) Stop screen of program operation 2(Ch.2)
Fig. 34) Operation screen of program operation 2(Ch.1)
Fig. 36) Operation screen of program operation 2(Ch.2)