29
Installation
Before starting
Operation
Screen block
diagram
Function setting Program System setting Specifications
▶ Menu pane
▶ Common
3) Program operation 3 screen (Graph view screen)
No. Description
1 Runs hidden menu pane. Click the same to hide menu pane.
2 Go to program operation 1 screen.
3 Go to main menu screen.
4 Displays measurement, setting value, and output of current operation channel in a graph.
5 Set the data display with the check box. Graph is not displayed with OFF selected.
User can set background color(white/black), drawing(line and dot), and line thickness(1 or 2 pixels) of graph.
It can be changed in [Main menu] - [Operation setting] - [Graph].
※Once the operation is started, the graph is being drawn accordingly. The flow of graph depends on the save interval.
①
②
③
④
No. Description
1
Hold is enabled only during program operation and current setting value is maintained when executing.
2
Step is enabled only during program operation, and it ends current segment and then forcibly
goes to next segment.
3 Press User-defined button to run assigned relay in [Main menu] – [System menu] – [DO].
4
Go to DI state check screen.
① ② ③
⑤
④
Fig. 41) Menu pane of program operation 2 screen(Ch.1)
Fig. 43) Program operation 3 screen
Fig. 42) Menu pane of program operation 2 screen(Ch.2)
Fig. 44) Menu pane of program operation 3 screen
To Next Page
Loading...
