4 - System setup
146
4. To connect to the display WiFi signal via the
iPad first go to the settings button on the
device.
5. Select the “Wi-Fi” tab from the left side menu
followed by highlighting and connecting to
the “Home Network” wireless network.
÷
NOTE! A password may be required to
connect to the network.
6. Both the display and the iPad should now be
on the same network.
7. Open AgFiniti Mobile app on the iPad.
÷
NOTE! Download AgFiniti Mobile from the
Apple App store.
8. Once the AgFiniti Mobile is open, it will
automatically attempt to connect to the HC
8600/9600 display.
Settings
Wi-Fi
Airplane Mode
Wi-Fi
Home Network
Ask to Join Networks
Known networks will be joined automatically. If no known networks are available, you will to manually
select a network.
Bluetooth
Cellular Data
Personal Hotspot
Notifications
Control Center
Do Not Disturb
General
Display & Brightness
Wallpaper
Sounds
Passcode
Not Connected
CHOOSE A NETWORK...
To Next Page
Loading...
