4 - System setup
147
9. Once the HC 8600/9600 display has been found, the display will prompt user to
allow connection to happen.
÷
NOTE! This should only happen once per device. Once a device has been
recognized, the device credentials are stored in the display (wait up to a minute
after opening the app for this to occur).
After pressing the green check mark, the mobile device will begin accepting data from the display
as it becomes available. The AgFiniti Status Indicator will show a device symbol in the top right
corner of the screen. Note: If display is logged in to AgFiniti Cloud a cloud symbol will also appear
in the AgFiniti Status Indicator.
Do you want to allow “My iPad” to access
logged data?
AgFiniti Mobile
To Next Page
Loading...
