7 - Fault finding
195
RTK/NTRIP Information
The following information appears on the second GPS Information screen for RTK or NTRIP.
• Convergence (%).
Successful communication between Base Station and ParaDyme Roof Module.
• Radio Throughput.
Displays percentage of data received from Base Station.
• Distance to Base.
Shows distance to Base Station in miles (kilometers).
• Base Channel.
Displays Channel ID of Base Station.
• NTRIP (NTRIP users only)
Shows either Connected or Disconnected.
GPS Information - NTRIP
Users of the NTRIP guidance system can also view the NTRIP Information screen below, in addition to the GPS Information
screens discussed previously.
• NTRIP Connect.
Connects the display to the NTRIP correction
source.
• NTRIP Stream.
Network mount point.
• NTRIP Status.
Displays NTRIP connection; either Connected
or Disconnected.
• Cellular Status.
Displays status of ParaDyme cellular modem;
either Connected or Disconnected.
• Cellular Signal Strength (%).
Displays a number between 0 and 100%.
• WiFi Status.
Displays status of WiFi router; either Connected or Disconnected.
• WiFi Signal Strength.
Displays a number between 0 and 100%.
GPS Information
Firmware Version:
Serial Number:
Active Vehicle:
Steering Status:
NTRIP Stream:
NTRIP Status:
Cellular Status:
Cellular Signal Strength (%)
WiFi Status:
WiFi Signal Strength (%)
NTRIP
Connect
Good
RTCM3_MAX
Stream Connected
Connected
Disconnected
General GeoSteer
To Next Page
Loading...
