Hardi HC 9600 User Manual

4 - System setup
57
26. Suggested Name for Configuration:
A. Press button to change name.
B. Press to confirm selection.
27. Trailer sprayers only:
Press “Offsets” to edit the configuration.
28. Trailer sprayers only:
A. If applicable, select “Hardi SafeTrack”
as implement Type.
μ
ATTENTION! For IntelliTrack sprayers, select
the “Hardi SafeTrack” option.
B. Press to type in the measured
distance from Hitch to the axle of the
sprayer.
C. Press to confirm.
Operating Configuration Wizard: Configuration Name
Suggested Name for Configuration
JD 6430, Hardi Commander
Configuration Setup
Vehicle
JD 4630
Vehicle
Offsets
Norac
UC5
Speed
Input
Auxiliary
Input
Automatic
Swath Control
Equipment
Settings
Offsets
Implement: Hardi Commander Controller: Hardi ISOBUS
Full Swath:
Sections:
Device:
Make:
Structure Label:
Implement Offsets: Hardi Commander
Implement Liquid with Hardi Sprayer
Implement Modeling
Implement Provides a Rear Hitch
Hitch to Axle
Distance
Lateral Offset from Centerline
Left
Implement Type
Hardi SafeTrack
Front Hitch to Rear Hitch
Implement Rear Hitch
Heading
Aggressiveness
Boom Height

Hardi HC 9600 Specifications

General

Brand	Hardi
Model	HC 9600
Category	Controller
Language	English