Hardi SMARTCOM ISOBUS UT SW A.2.2 Series User Manual

5 - Operation
106
Part 2
Drive to farm fill station.
Part 3
Prepare sprayer for cleaning with cleaning agent:
• Fill water in the MainTank to 10% of capacity.
• Fill the RinseTank completely. This water is used later in part 6.
Part 4
With the FluidBox, operate sprayers valves according to cleaning agent
instructions.
• Wash the MainTank with the cleaning nozzles.
• Fill the boom tubes with cleaning agent from the MainTank.
• Rinse the safety valve.
• Rinse the PressureEmpty hose.
• Rinse the Agitation valve, hose and tube.
Also wash the TurboFiller with cleaning agent water from the MainTank. This also rinses the ejector with cleaning agent
water.
Part 5
Spray out water with cleaning agent and chemical residue.
Note that this still contains active chemical and choose an appropriate
area to spray out this.
μ
ATTENTION! Be aware of chemical accumulation in case the same
area is used repeatedly.
Part 6
Use FastFlush to wash out all remains of the cleaning agent.
This is to avoid that the cleaning agent remains in the fluid system.
Remains could damage the next spray chemical filled into the MainTank.
2
3
4
5
6

Hardi SMARTCOM ISOBUS UT SW A.2.2 Series Specifications

General

Brand	Hardi
Model	SMARTCOM ISOBUS UT SW A.2.2 Series
Category	Farm Equipment
Language	English