EasyManua.ls Logo

HARDKERNEL ODROID-XU4 - DC Plug Cable and USB Audio Adapter

HARDKERNEL ODROID-XU4
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59 ODROID-XU4 USER MANUAL
The image above shows both the assembly and the QT-based
application’s user-interface displaying the real-time weather data.
DC Plug Cable Assembly 5.5mm
The DC Plug cable accessory, shown below, is typically used
to provide power to the XU4 using a special purpose power supply.
These power supplies could include bench-top models or Hardkernel’s
SmartPower. Ensure that the power supply provides clean power, rat-
ed at 5V, 2.0+ Amps. Use the cable colors to ensure polarities match
at either end.
DC plug cable assembly
USB Audio Adapter
Attach the USB-powered audio adapter to the XU4. After a few
moments, check to see if the device is detected:
$ lsusb
Bus 002 Device 002: ID 0d8c:000c C-Media Electronics, Inc. Audio
Adapter
USB audio adapter with USB-powered speakers
This adapter is based on the CM108AH single-chip USB audio
solution, and is capable of stereo output and includes the dual DAC/
headphone amplier, ADC, microphone booster, PLL, regulator, and
USB transceiver. While the setup can be tested with headphones con-
Chapter 4

Table of Contents