ENGLISH
Memorizing the adjusted channel levels
• Then "1" of "REF 1" indication flickers for several seconds.
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you
want.
• "CAL " (or "REF 1", etc.) is displayed for several seconds.
• If the channel level mode display disappears, press this
button again.
• The adjusted channel levels have now been memorized
into the selected memory.
• If the preset memory disappears, perform the above step
1 again.
1. After performing the steps 1 ~ 4 in "Adjusting the
current channel level" procedure on page 22, press
the OK button.
Recalling the memorized channel levels
• The channel levels memorized into the selected preset
memory are recalled.
2. Select the desired one of REF 1 and REF 2.
3. Confirm your selection.
1. Press the CHANNEL SELECT button. 2. Select the desired one of REF 1 and REF 2.
23
To Next Page
Loading...
Need help?
General
