ENGLISH
31
Operating the sleep timer
• The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off.
• To set the receiver to automatically turn off after the specified period of time.
Adjusting the brightness of the fluorescent display
OTHER FUNCTIONS
• Each time this button is pressed, the display mode
changes as follows:
• When the 6CH DIRECT INPUT is selected as an input
source, the surround mode is not displayed.
• When the USB IN is selected as an input source, for
details on the file information, see “Displaying file
information during playback” on page 28.
Displaying the operation status
Surround
mode
Volume
Input
source
• Each time this button is pressed, the sleep time changes
as follows:
10 20 30 --- 90 OFF
Unit : minutes
• While operating the sleep timer, " " lights up.
• When the sleep time is selected, the fluorescent display
is dimly lit.
• Each time this button is pressed, the brightness of
the fluorescent display changes as follows:
ON dimmer OFF
• In the display OFF mode, pressing any button will
restore the display ON mode.
During playback,
To Next Page
Loading...
Need help?
General
