ENGLISH
37
SETTING THE SPEAKER SETUP
• After you have installed this receiver and connected all the components, you should adjust the speaker settings for optimum
sound according to your environment and speaker layout.
• In case you change speakers, speaker positions, or the layout of your listening environment, you should adjust the speaker
settings again.
When selecting CONFIGURATION
1. Press the / buttons to select "CONFIG", then press
the OK button.
2. Press the / buttons to select the desired speaker.
• CONFIG (CONFIGURATION) : To select the sizes of the speakers that are connected.
• DISTANCE: To enter the distance between the listening position and each speaker to set the delay time
automatically for optimum surround playback.
• X-OVER (CROSSOVER) : To select the desired crossover frequency.
• RETURN : To return to the previous menu.
To Next Page
Loading...
Need help?
General
