8. CONNECTING SPEAKERS
9. AC INPUT
• You can connect two sets of front speakers and can
select front A or/and B speakers according to your taste.
• Be sure to connect speakers firmly and correctly
according to the channel(left and right) and the polarity(+
and -). If the connections are faulty, no sound will be
heard from the speakers, and if the polarity of the speaker
connection is incorrect, the sound will be unnatural and
lack bass.
• For installing the speakers, refer to "Speaker placement"
on page 9.
• After installing the speakers, first adjust the speaker
settings according to your environment and speaker
layout.(For details, refer to "SETTING THE SPEAKER
SETUP" on page 37.)
Caution :
• For safe amplifier operation, in case of using either front A
or front B speakers, use all the speakers with impedance
of over 6 ohms. However, in case of using both front A
and front B speakers, use only these speakers with
impedance of over 12 ohms and other speakers with
impedance of over 6 ohms.
• Do not let the bare speaker wires touch each other or any
metal part of this unit. This could damage this unit and/or
the speakers.
• Plug the supplied AC cord into this AC INPUT and then
into the wall AC outlet.
NOTE : Do not use an AC cord other than the one supplied
with this unit. The AC cord supplied is designed for
use with this unit and should not be used with any
other device.
To Next Page
Loading...
Need help?
General
