ENGLISH
24
LISTENING TO RADIO BROADCASTS
Auto tuning
• Each time this button is pressed, the band changes as
follows ;
FM ST FM MONO AM
("ST" lights up) ("ST" goes off)
• When FM stereo broadcasts are poor because of weak
broadcast signals, select FM mono mode to reduce noise,
causing FM broadcasts to be reproduced in monaural
sound.
• Manual tuning is useful when you already know the
frequency of the desired station.
• After selecting the desired band, press the TUNING UP/
DOWN buttons repeatedly until the right frequency has
been reached.
Manual tuning
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and "TUNE".
• If the station found is not the desired one, simply repeat
this operation.
• Weak stations are skipped during auto tuning.
1. Select the desired band. 2. Press the TUNING UP/DOWN buttons for more than
0.5 second.
Auto presetting
• Auto presetting function automatically searches for FM
stations only and store them in the memory.
• While listening to FM radio broadcasts, press and hold
down the MEMORY button for more than 2 seconds.
• Then "AUTO MEM" flickers and the receiver starts auto
presetting.
• Up to 30 FM stations can be stored.
NOTES:
• Weak FM stations are not memoried.
• To memorize AM stations or weak stations, perform
"Manual presetting" procedure with using "Manual tuning"
operation.
To Next Page
Loading...
Need help?
General
