Harman CROWN CDi DriveCore Series - Initial Setup and Guided Configuration

Page 12
CDi DriveCore Series Operation Manual
Conguring the Amp
Using the Guided Setup
The Guided Setup walks you through all the steps to configure the amplifier. This includes
assigning input channels, configuring internal DSP wiring and settings, and configuring
output operation.
To congure the amplier using the Guided Setup:
1� From the Home screen, press the MENU button.
2� Select the “Configure Amplifier” option from the menu using the ENCODER.
3� Select the "Guided Setup" option from the menu.
4� Follow the on-screen steps, making selections with the ENCODER. If you wish to exit
the Guided Setup at any time, press the MENU button.
NOTE: After completing the Guided Setup, configuration settings will be retained after power cycling the amp. However, it's a good idea to save the
configuration. The configuration must be saved before loading another device preset or the settings will be lost. See "Saving Device Presets" on
page 63
for information on saving device presets.
Figure 12: Configure Amplifier menu