HMX6801+B2/C2 and HMX6801+B4/C4 Installation and Operation Manual 15
Chapter 2: Installation
Installing and Removing HMX6801+ Modules
The HMX6801+ modules have double-width back connectors. The
modules cannot be installed in frames without fans, or in FR6802+DM
and 6800/7000 series frames.
These modules require no specialized installation or removal
procedures. However, if you are installing both front and rear modules,
ensure that the back module is installed first before plugging in the front
module. Likewise, ensure that the front module is unplugged from the
frame before removing the rear module. See the FR6802+ Frames
Installation and Operation Manual for information about installing and
operating an FR6802+ frame and its components.
Before installing your modules,
see Table 2-1 "Maximum Power
Settings for 6800+ Frames" on
page 12.
To Next Page
Loading...