EasyManua.ls Logo

Harvia sentiotec Pro C2 - Page 96

Harvia sentiotec Pro C2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instructions for installation and use p. 48/48
Thermal safety
Heater sensor with excess temperature fuse (139 °C shut-off temperature)
Adjustable automatic heating period (6 h, 12 h, 18 h, 24 h)*
Optional single-sensor mode or two-sensor mode
Connection cables
Power supply cable: min. 5 x 2.5 mm²
Heater supply cable (temperature-resistant up to 150 °C):
min 2.5 mm²
Sensor wires (temperature-resistant up to 150 °C): min 0.5 mm²
Light wire: min. 1.5 mm²
Fan wire: min. 1.5 mm²
* EN 60335-2-53 species a heating time limitation of 6 h for saunas for private
use. For saunas in hotels, apartment blocks and similar locations, a maximum
heating period limit of 12 hours is permissible. Extending the heating period
limit to 18 hours or 24 hours is only permitted in public saunas.

Table of Contents