Email: service@haskris.com
V. Installation: Electrical, Remote Control Panel
Electrical
• Comply with proper local electrical codes.
• Contact a licensed electrician to perform the electrical installation.
• The electrician should verify that the wiring is adequate in the installation area.
• Refer to the chiller specification document for detailed electrical requirements.
• Do not mount or support any electrical service disconnect directly to the chiller.
• Use flexible conduit from service panel disconnect through pilot hole to main electrical panel.
Do not use rigid conduit at chiller.
• The base of the chiller has several openings where incoming electrical can be brought into the
chiller.
To Next Page
Loading...
