Email: service@haskris.com
IX. Optional Modbus or BACnet Communication Capability
Building Management System
Purpose: Some facilities have centralized building monitoring systems (BMS). This requires a physical
wire connection point between the chiller and the BMS. This also requires that the controller in the
chiller be configured to communicate according to the configuration of the BMS.
Haskris Capability
• The standard Haskris chiller design is not capable of providing a connection point to the BMS.
• An additional controller must be added to the chiller to provide available connection points for
the physical wire connection. This additional controller contains all necessary software
licenses to communicate via BACnet.
• Haskris can provide this as an optional addition to the standard design.
Implementation
• If Haskris is notified within 1 week of shipment, Haskris can build the necessary modifications
into the chiller at our factory.
• If this capability is needed after-the-fact in the field, contact Haskris for pricing and assistance
with performing the necessary modifications.
To Next Page
Loading...
