Email: service@haskris.com
III. Installation: Foundation, Vibration, Elevation, Clearances,
Transportation
Foundation
• The chiller must be installed on a level concrete foundation, level roof curb, or level perimeter
beam system.
• Comply with local codes for proper anchoring and vibration isolation.
• Use of a level roof curb or perimeter beam system requires the specifying engineer to identify
all necessary materials of construction, thickness, and additional bracing or supports.
• See the diagrams below for mounting hole locations.
• Point load at each mounting location is 200 lbs. or less.
To Next Page
Loading...
