EasyManua.ls Logo

Haskris OPC5 - E-Coated Condensers for Corrosion Resistance; Louvered Hail Guard Panels; Energy Saving Eco Mode

Default Icon
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 52 of 55
Email: service@haskris.com
Phone: 001 847 956 6420
E-coated Condensers for Corrosion Resistance
Purpose: The condensers that are installed on this chiller have an e-coating. This coating protects the
condenser from corrosion. This is particularly important in coastal areas with salty ocean air.
Louvered Hail Guard Panels
Purpose: The chiller includes panels to protect the condensers from hail damage. The panels have
louvers to allow airflow while blocking hail.
Energy Saving eco Mode
This section applies to OPC16 and OPC24 only
Purpose: When the chiller is under a reduced load, the chiller will use fewer refrigeration circuits to
provide cooling to reduce power consumption.
Operation: When the chiller is in eco mode, the status on the display will say “ON eco”. The controller
initiates eco mode based on the operation of the refrigeration hot gas bypass valves and the
refrigerant head pressure.
Eco mode active

Table of Contents

Related product manuals