Haskris OPC5 - Adjusting Set Value (Sv); Units of Measure

Page 42 of 55
Email: service@haskris.com
Phone: 001 847 956 6420
Adjusting Set Value (sv)
Notes: Set Value is the only adjustable value on this screen. To change the setting, follow the
procedure below.
1. To change the value, press the button to move the blinking cursor to the value
2. Press the or buttons to adjust the value
3. Press the button to move the blinking cursor to the top left corner
Units of Measure
Purpose: Several combinations of units of measure are available depending on what is most useful.
The following units of measure are available:
• CAN (°C, psi, GPM)
• UK (°C, bar, IGM)
• USA (°F, psi, GPM)
• SI (°C, bar, LPM)