Hawk Gladiator User Manual

32
Admittance Smart Switch Series
Manual
Rev 1.2, June 2008
33
HawkLink GSM/CDMA communication
device allows any authorized computer
with a standard modem and GosHawkII
software to dial in and calibrate, test
or check in on the performance of the
connected Hawk product. The HawkLink
device can be wired to the standard
communication terminals of the Hawk
products.
Remote connection worldwide!
ADVANCED REMOTE COMMUNICATION
GSM/CDMA
Remote technical support and complete
commissioning of equipment in applica-
tions is possible via our GSM/CDMA
module and allows monitoring and
adjustment of settings no matter what
corner of the world.

Hawk Gladiator Specifications

Power

operating voltage	12-30VDC, 90-260VAC, 36-60VDC
power consumption	<0.8W @ 24VDC, <5VA @ 240Vac, <3VA @ 115Vac

Operating Environment

maximum operating pressure	2 BAR
operating temperature for remote electronics	-40°C (-40°F) to 80°C (176°F)
operating temperature for remote sensors	-20°C (-4°F) to 80°C (176°F)
enclosure sealing for remote electronics	IP67 (NEMA 4x)
enclosure sealing for remote sensors	IP68

Weight and Dimensions

transducer to amplifier separation	Up to 500m (1640ft)
typical weight for 15kHz transducer	8 kg
typical weight for remote amplifier	1 kg