Regulatory & Warranty Information 55
Number to program into computer:0 9 8 7 6 5 4 3 2 1
NOTE: - DTMF digits are entered and dialled in the normal manner.
This modem does not fully meet Telecom’s impedance requirements. Performance limitations
may occur when used in conjunction with some parts of the network. Telecom will accept no
responsibility for any difficulties that may arise from such situations.
The transmit level from this modem is set at a fixed level. Because of this, there may be
circumstances where the performance of this modem will be less than optimal. Before reporting
such occurrences as faults, check the line with a standard Telepermitted telephone and do NOT
report it immediately as a fault.
WARNING: It is recommended that this modem be disconnected from the telephone line during
electrical storms.
When disconnecting this equipment, always disconnect the Telecom line before removing the
power. When reconnecting, connect the power first, then the Telecom line.
NOTE: Failure to meet any of the above requirements may negate the users rights under the
Telecom terms of service.
Limited Warranty—North America
(This Limited Warranty applies to Products sold within the borders of the United States of America
and Canada.)
Who is Covered by This Warranty? This limited warranty (“Warranty”) is extended by Zoom
Telephonics, Inc. (“Zoom”) only to the original end user purchaser of the accompanying HAYES
HARDWARE PRODUCT (“Hardware”) and/or HAYES SOFTWARE PRODUCT (“Program”)
(separately and together, “Product”).
What Does This Warranty NOT Cover? Zoom does not warrant or guarantee you uninterrupted
service, the correction of any error or elimination of any “bug”. You are solely responsible for any
failure of the Product which results from accident, abuse, misapplication, alteration of the Product,
or use of the Product outside of the borders of the country or countries shown on the Product
package. Zoom assumes no liability for any events arising out of the use of any technical
information accompanying the Product. THIS WARRANTY APPLIES TO THE PRODUCT ONLY
AND DOES NOT COVER ANY OTHER SOFTWARE OR HARDWARE WHICH MAY BE
INCLUDED WITH YOUR PURCHASE OF THE PRODUCT. WITHOUT LIMITING THE
GENERALITY OF THE FOREGOING, ANY SOFTWARE OTHER THAN THE PROGRAM IS
PROVIDED “AS IS” AND WITHOUT WARRANTY OF ANY KIND. INCIDENTAL AND
CONSEQUENTIAL DAMAGES CAUSED BY MALFUNCTION, DEFAULT, OR OTHERWISE WITH
RESPECT TO BREACH OF THIS WARRANTY OR ANY OTHER EXPRESS OR IMPLIED
WARRANTY ARE NOT THE RESPONSIBILITY OF ZOOM AND ARE HEREBY EXCLUDED
BOTH FOR PROPERTY AND, TO THE EXTENT NOT UNCONSCIONABLE, FOR PERSONAL
INJURY DAMAGE. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above exclusion or limitation may not apply to you. This Warranty
gives you specific legal rights and you may also have other legal rights which vary from state to
state.
What is the Period of Coverage? The period of coverage for the enclosed Hardware and/or
Program is set forth in the Warranty Period section of this Guide. If this section indicates that
Zoom offers an Extended Protection Plan (“Plan”) for the enclosed Hardware and/or Program and
you select the Plan, the period of coverage for the Hardware and/or Program would be the total of
the original Warranty Period and the Plan period. ANY AND ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL TERMINATE
AUTOMATICALLY UPON THE EXPIRATION OF THE PERIOD OF COVERAGE. Some states do
To Next Page
Loading...
Need help?
General
