HBM QuantumX CX22B - Page 16

Introduction
14 A3169-8.0 HBM: public CX22B / CX22B-W
The data recorder’s functions can be extended with
packages such as:
- EasyRoadLoad: for road load data acquisition
(RLDA)
- EasyScript: for vehicle dynamics analysis (brake
tests, lane change...)
- EasyMonitoring: for infrastructure monitoring tasks
(connection to central data servers: Cloud)
The device is a QuantumX with the "Windows
Embedded‐8 Standard
TM
" operating system and
pre-installed catman

Easy software from HBM. Most of
the software functionality is described in the data sheet.
Interfaces on the back of the QuantumX Data Recorder:
S 2 x FireWire (ODU socket, 4-pin) for connecting
QuantumX modules such as MX840B, MX471B or
also SomatXR modules such as MX1615B-R.
S Connector strip for backplane integration. e.g.
BPX002
S Voltage supply (ODU socket, 4-pin)
S CFast slot (8 GB memory card is included in the
scope of supply)
The following interfaces and options can be found on the
front:
S 1 x RS232, e.g. for connecting position sensors (GPS,
GLONASS)
S 2 x Gigabit Ethernet, 1 x WLAN (CX22B-W only), 1 x
USB 3.0 and 2 x USB 2.0, 1 x DVI‐D
S 3 x digital inputs and 3 x outputs and push button for
start/stop assignment