Operating the Data Recorder
44 A3169-8.0 HBM: public CX22B / CX22B-W
for example, or can use Ctrl-C (Copy) and Ctrl-V (Paste)
to exchange data between the PC and the CX22B‒W.
You can:
S Create your own definition for the remote desktop
connection. Launch the remote desktop connection
program. Enter the IP address of the CX22B‒W and
click on Options.
S Change the definition used by the HBM Device Man
ager program. To do this, open the CX22B.rdp file in
the installation directory of the HBM Device Manager
software.
Important
The group policy of the network administrator can limit or
totally prevent changes being made to the settings for the
remote desktop connection. Contact your network
administrator if one of the settings mentioned below is
not available to you.
Further procedure
► Go to the Local resources tab and activate Clip
board , for example, and/or Printers (Fig. 6.6).
This allows you to use the clipboard of your PC to copy
and paste data, as well to use your PC's printer from the
CX22B‒W.
To Next Page
Loading...
