HBM QuantumX CX22B - Page 54

The CX22B‒W Data Recorder start screen
52 A3169-8.0 HBM: public CX22B / CX22B-W
the (Windows) system. This permanently stores the
changes that have been made.
S Terminate the remote desktop connection: Close re
mote connection.
You can also terminate the connection by closing the
remote desktop window.
S Switch to the system level (Windows): Exit to Win
dows.
This is necessary, for example, when you want to ac
tivate the CX22B‒W WLAN.
S Shut down the CX22B‒W Data Recorder: Shut
down.
This switches off the CX22B‒W. Interrupt the power
supply for approx. 5 seconds, to switch it back on
again.
S Call up the directory with the QuantumX system docu
mentation: Help.
S Call up the default directory with the measurement
data: Data.
This opens the directory specified in Settings on the
General tab.
Recalling the start screen
If you have used Exit to Windows to exit the start
screen, you can recall it via CX22Shell (on the Windows
desktop).
The link brings the start screen to the top.