Safety instructions
6 A3169-8.0 HBM: public CX22B / CX22B-W
S The permissible relative humidity at 31°C is 80% (non
condensing); linear reduction up to 50% at 40°C.
S Do not expose the device to direct sunlight.
S Install the device so that it can be disconnected from
the mains at any time without difficulty.
S It is safe to operate the module up to a height of
2000 m.
Maintenance and cleaning
The modules are maintenance-free.
S Before cleaning, disconnect all connections.
S Clean the housing with a soft, slightly damp (not wet!)
cloth. Never use solvent, as this could damage the
label or the housing.
S When cleaning, ensure that no liquid gets into the
module or connections.
Residual dangers
The scope of supply and performance of the QuantumX
system covers only a small area of measurement tech
nology. In addition, equipment planners, installers and
operators should plan, implement and respond to the
safety engineering considerations of measurement tech
nology in such a way as to minimize residual dangers.
On-site regulations must be complied with at all times.
Product liability
In the following cases, the protection provided for the de
vice may be adversely affected. Liability for device func
tionality then passes to the operator:
S The device is not used in accordance with the operat
ing manual.
To Next Page
Loading...
