HDFury Integral 2 - Input Switching and Matrix Mode; Switching Inputs and Entering;Exiting Matrix Mode

Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
10
4K Integral 2 – User Manual
Input Switching and Matrix mode
Input Switch / Matrix Mode Button allow you to switch active inputs or enter/exit the Matrix mode.
[Short Press] will switch the active input channels in Splitter Mode and swap/cross signals in Matrix
mode.
[Long Press] (over 2sec) will enter/exit the Matrix Mode
Integral 2 OSD will report the two active inputs in Matrix mode while only the current active input is
reported via OSD in Splitter mode.
Note: You can also switch inputs and Matrix, Splitter mode and any others control with IR codes, from
the USB GUI for Windows PC, RS232 for MAC/WIN/Linux or via smartphone/tablet APP for Android/iOS
using GoBlue.