Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
4K Integral 2 – User Manual
The RS232 section of the USB GUI for Windows PC:
[RS232 COMMAND]: Allow you to test RS232 command to make sure your unit is properly configured
and ready to communicate via RS232.
[Send Test]: Once RS232 command have been entered, use this button to send it out.
[RS232 BAUD RATE]: Set the RS232 link speed (default 19200)
The MACROS section of the USB GUI for Windows PC:
With the help of power users from the community, special automatic and custom macro has been
developed for JVC Projectors. Kindly please refer to instructions posted here.
To Next Page
