HDFury Integral 2 - Total Control APP for Android;iOS; Overview of the Mobile App Features

Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
52
4K Integral 2 – User Manual
#set cecstr x
Transmits a CEC string to the network if CEC is enabled.
x must be of the format where data bytes are separated by a : -character
example to turn off devices, #set cecstr 0f:36
#set jvcmacro / #get jvcmacro
Toggle the JVC macro functinality. x can be on/off
#set jvcmacromode x / #get jvcmacromode
Select the active JVC macro mode. Applicable only when jvcmacro enabled.
Algorithms: [x]
0 = "Automatic"
1 = "Ignore Metadata"
2 = "Semi-Automatic"
3 = "Custom"
#set mutebotaudio x / #get mutebotaudio
Mute the bottom HDMI output audio
#set audiovol x / #get audiovol
Controls the L/R analog audio jack audio output
x can be -102 to +12 dB
#set audiobass x / #get audiobass
Controls the L/R analog audio jack audio output
x can be -10 to +10 dB
#set audiotreb x / #get audiotreb
Controls the L/R analog audio jack audio output
x can be -10 to +10 dB
4K Integral 2 Total Control APP 1.0.0 for Android and iOS