HERO DUET - Tyre Inspection and Tread Wear

22
Ÿ Cuts, splits or cracks in the tyre. Replace the
tyre if you can see fabric or cord.
Ÿ Excessive tread wear.
Inspection
Whenever you check the tyre pressure, you
should also examine tyre treads & side walls
for wear, damage & foreign objects.
Look for:
Ÿ Bumps or bulges in the side of the tyre or
the tread. Replace the tyre if you find any
bumps or bulges.
TWI
(1) Tyre wear indicator (2) Arrow mark
1
2
1
Replace tyres immediately when the wear
indicator (1) appears on the tyre. The tread
limits are :
Check the tread wear indicator for tyre wear.
Ÿ Carefully inspect the tyres for any damage,
if the vehicle hits a pothole or hard object.
Tread wear
Minimum tread depth:
Front: 1.5 mm Rear: 1.5 mm
(1) Air pressure gauge
1
CAUTION
!!
Over inflation/Under inflation will affect the
performance.