32
Refer to the safety precautions on (page-29)
Reinstall the filter screen with the sharp
edged side facing inwards.
Remove the kick starter pedal (1),
muffler (2), disconnect the clutch cable
(4), and rider foot rest (3). Remove the
right crankcase cover (5).
Remove the oil filter screen (6) and
wash it in clean non flammable or high
flash point solvent (kerosene) .
(3) Rider foot rest
(4) Clutch cable
(2) Muffler
(1) Kick starter pedal
5
4
1
2
3
(7) Centrifugal filter cover
(6) Oil filter screen
(5) Right crankcase cover
(8) Centrifugal filter
7
8
6
5. Remove centrifugal filter cover (7) &
clean the centrifugal filter (8) with non
flammable or high flash point solvent
(kerosene or diesel).
7. Fill the crankcase with clean engine oil
as per specification.
6. Reinstall the centrifugal filter cover,
right crankcase cover & kick starter
pedal, rider foot rest, muffler and
connect the clutch cable.
To Next Page
Loading...
