EasyManua.ls Logo

HERO SPLENDOR+ PROGRAMMED FI - Evaporative Emission Control System; Polishing of Vehicle

HERO SPLENDOR+ PROGRAMMED FI
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(1) Catalytic converter
Keep the engine in good running condition.
A poorly running engine can cause the
catalytic converter to overheat.
Always use unleaded petrol. Even a small
amount of leaded petrol can contaminate
the catalyst metals, making the catalytic
converter ineffective.
If your engine is misfiring, backfiring,
stalling, or otherwise not running properly,
stop riding and turn “OFF” the engine.
Have your vehicle serviced as soon as
possible.
1
prevent petrol vapours from escaping into the
atmosphere from fuel tank. The canister (1)
collects the fuel vapour from the fuel tank and
then the fuel vapour is drawn into the engine
for re-burning to avoid pollution caused by
the fuel vapour diffused into the air.
This vehicle is equipped with an evaporative
emission control system to meet emission
standards. During warm weather, the petrol
vapours which contain HC evaporates easily
into the atmosphere from the fuel tank, if the
fuel system is unsealed or open. The
evaporative emission control system is used to
EVAPORATIVE EMISSION CONTROL
SYSTEM
(1) Canister
1
NOTE
Polishing or waxing is not applicable for
models having matte paint.
POLISHING OF VEHICLE
After washing your vehicle, wax all painted
surfaces (except matte painted surfaces) using
a commercially available polish/quality liquid
or paste wax to finish the job. Use only a non
abrasive polish or wax made specifically for
automobiles. Apply the polish or wax
according to the instructions on the container.
54

Related product manuals