EasyManua.ls Logo

HERO SUPER SPLENDOR PROGRAMMED FI - RUNNING IN; Initial 500 km Riding Guidelines; RIDING; Operation and Gear Shifting

HERO SUPER SPLENDOR PROGRAMMED FI
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
While the engine is idling, press the clutch
lever and depress the gearshift pedal
st
downwards using the toe to shift into 1
gear.
Slowly release the clutch lever and at the
same time, gradually increase engine speed
by opening the throttle. Coordination of the
throttle and clutch lever will assure a smooth
positive start.
When the vehicle attains a moderate speed,
close the throttle, press the clutch lever and
nd
shift to gear by depressing the gearshift
2
pedal.
After the engine has been warmed up, the
vehicle is ready for riding.
RIDING
CAUTION
!!
Do not shift gears without operation of clutch
and without closing the throttle otherwise this
would lead to damage of gears.
24
For normal braking, close the throttle and
gradually apply both front and rear brakes
simultaneously while shifting down gears to
suit your road speed.
BRAKING
For maximum deceleration/quick stopping,
close the throttle and apply the front and
rear brakes simultaneously.
Recommended max. operating speed in
each gear.
th
4 : 25-50 km/hr
th
5 : 40 km/hr and above
st
1 : 0-15 km/hr
nd
2 : 10-25 km/hr
rd
3 : 20-40 km/hr
WARNING
!!
Never run the engine in a closed area, the
exhaust contains poisonous gases.
The sequence is repeated progressively to
rd
th th
shift 3 4 and 5 (top gear).
,
Running in
Help assure your vehicle's future reliability and
performance by paying extra attention to how
you ride during the first 500 km.
During this period, avoid full-throttle starts
and rapid acceleration.
NOTE
To start the engine if any gear is engaged,
press the clutch lever and press the starter
switch.
Do not open the throttle during starting the
vehicle.
4
1
N
2
3
5

Related product manuals